You have just received your spa
Just a little more effort; the assembly takes only a few minutes.
Unpack
Your spa is delivered with everything you need to get it up and running.
Inflate
A pump is provided with your spa. Connect it to your spa and pump for about 2 minutes. Once the pressure of 5-7 psi (middle yellow zone) is reached, close the cap.
Connect the motor
There are 3 hoses to connect and screw to your spa and the motor. Once the motor is connected, open the inner caps of the spa.
Fill with water
Open a water hose and fill water up to the 'min' and 'max' limits of your spa.
Turn on the motor
Plug in the motor socket and press the 'RESET' button on the socket to start the filtration and heating.
